Fence Panel Clips Galvanised

About our fencing clips and brackets

Now that the fence post and panels are organised the next task is to secure the fence panels to the post.

Fence panel clips are either 44m or 50mm thick and we supply these U shaped clips in pack of 4 which is sufficient to secure a panel.

Each clip is manufactured from high quality carbon steel and galvanised for longevity and corrosion resistance with 2 x 5mm holes to secure the bracket to the post and 2 more fix the panel. As supplied in packs of 4 there is sufficient to secure each panel.

The clips give a very professional finish without the risk of splitting the wood if nailed.

The Z clips we offer is a galvanised clip or bracket 60mm x 56mm x 15mm back-set

It is designed to secure trellis and other decorative panels to posts or panels. They are fitted using either galvanised nails or woodscrews

Manufactured from high quality 1.5mm thick carbon steel which is pre drilled with a total of 4 x 4mm holes and galvanised for longevity and corrosion resistance.

Prior to fitting always check the integrity of the panel or post as any rot or decay will need to be removed prior to installation.

Concrete post fixing brackets

Securing fencing panels to concrete post can cause problems as drilling into reinforced concrete can be very difficult.

Timco have designed a special bracket for a standard 100mm (4”) concrete 233mm wide x 40mm deep The cranked section is 123mm and 25mm back set which fits around the post and the 5mm screw holes at either end of the bracket is fixed to the panels. Two brackets form a clamp around the post with the panel set in the middle.

Manufactured from high quality 1.5mm thick carbon steel which is pre drilled with a total of 4 x 5mm holes or slotted holes and galvanised for longevity and corrosion resistance. Check out our concrete post fixing brackets here.