Timco fence post supports quick fit red oxide 75mm
Timco fence post supports red oxide powder coated - quick fit with M10 x 90 through bolt fixing kit
Timco fence post supports 75mm hot dipped galvanised - quick fit
Timco fence post supports 75mm hot dipped galvanised - quick fit with M10 x 90 through bolt fixing kit
Timco fence post supports red oxide - 100mm quick fit
Timco fence post supports red oxide powder coated - 100mm quick fit with M10 x 90 through bolt fixing kit
Timco fence post supports galvanised powder coated - 100mm quick fit
Timco fence post supports galvanised powder coated - 100mm quick fit with M10 x 90 through bolt fixing kit
Fence post support bolt down base available with either Red oxide or Hot dipped galvanised finish are available in sizes to accommodate 75mm and 100mm square section posts and in each size a quick fit base where the post is hammered onto the base and a bolt secure version where the post is securely fastened by 2 bolts which clamp the post to the base.
Bolt down fence post shoes are a quick and easy way to erect fencing and garden posts as they require no digging or concreting into place, saving time and money. Designed to be fixed down onto an existing concrete base or wall and are perfect for patio fencing, decking, pergolas or car ports.
Bolt Secure post bases The two M8 x 35 bolts secure and clamp the post firmly in place.
These bolts allow for post removal at a later stage.
Prevents against post rot and decay as it holds the base of the post above ground level.
Quick Fit post bases have Inverted fins hold the post in a vice like grip
Prevents against post rot and decay as it holds the base of the post above ground level
Both types can be over painted if you wish
Installation guidance
Select the location either existing concrete or wall and mark the spacing of the posts. Tarmac is not suitable.
Drill the 4 10mm holes at least 100mm deep and drop in one of our free offers Through bolts in each hole and tighten to secure. A tip is to set a washer in the centre underneath the base. This will allow for small movement when checking that the base is plumb (sides vertical) by adjusting the tightness of each bolt
For Bolt Secure bases then drop in the post and after checking it is plumb, tighten the two M8 x 35 bolts with a 13mm spanner
For Quick fit bases tap the post into the base and after checking that it is vertical secure with screws through the holes provided. Some tradespeople find it easier to assemble the post to the quick fit base prior to drilling and securing to the concrete.
Take advantage of our special offer of 4 Through bolts M10 x 75mm FREE with every post base shoe