Lampholder Cordgrip T2, 100 watt - Bayonet connection (BC)
This cordgrip lampholder is made from plastic with a metal bulb holder. The metal bulb holder has either a bayonet cap (BC) connector. A light bulb with a corresponding connector fits into the lamp holder. The flex is sufficient to hold most lampholders but heavier lights may require additional support. These tough fittings can be used in many domestic and commercial applications. Its is designed to withstand normal knocks and can easily stand up to the wear and tear of busy working conditions.
- Rating: T2 100w
- 220 - 240v AC
- CE approved to BS specification
- Quantity: 1 pc
- All electrical installations should be in accordance with the 17th edition IEE Wiring Regulation
- Before undertaking any electrical work it is essential to switch off at the main supply
- If in any doubt consult a qualified electrician Stay safe and stay alive
You May Be Interested In...
Ceiling Pendant with 6" flex T2 rated (100w) with short skirt
Plate Switch 1 Gang 2 Way 10amp enables the light to be controlled from 2 locations e.g. Controlling the landing light from both up and down stairs
Pushbar switch T1 60watt B22 (BC) bayonet lampholder ideal for table lamps
