Post Spikes Drive in Quick Fit Red Oxide 100mm x 750mm
Drive in fence post spikes are a quick and easy way to erect fencing and garden posts as they require no digging or concreting into place saving time and money. They feature a 4 fin steel spike to ensure a solid permanent wind resistant fit.
The quick fit version features inverted fins inside the post holder section that will hold the post in a vice like grip. This system prevents against post rot and decay as it will hold the base of the post above ground level.
The bolt secure version features 2 x 8mm carriage bolts that tighten and clamp the post firmly into the post holder section to prevent any post movement as well as allowing for over / undersized post tolerance and also allows the removal of the post at a later stage if required. This system prevents against post rot and decay as it will hold the base of the post above ground level.
| Ref Code | Post Size (mm) |
Post Holder Length (mm) | Overall Length (mm) |
Max Fence Height (ft) |
|
| PSQ75750 | 75 x 75 | 150 | 750 | 6 | |
| PSQ100750 | 100 x 100 | 150 | 750 | 6 | |
| PSB75750 | 75 x 75 | 150 | 750 | 6 | |
| PSB100750 | 100 x 100 | 150 | 750 | 6 |
- Finish: Red oxide powder coated
- Pack quantity: 1 pc
