Switch & Socket Metal Back Box, 35mm deep, 1gang
These single (1 gang) metal back boxes are made from galvanised steel. Back boxes are recessed into the wall allowing the face plate to be screwed and secured flush to a wall. The back box itself should be screwed into position. Common face plates are light switches, plug sockets, modular systems, etc. Depth is determined by the number and size of the wires to be contained, we stock a full selection. These fittings can be used in many domestic and commercial applications. .
- Size: 68 x 68mm
- Depth: 35mm
- Flush mounting
- Brass earth terminal
- Galvanised
- CE approved to BS 4662All electrical installations should be in accordance with the 18th edition IEE Wiring Regulation
- Before undertaking any electrical work it is essential to switch off at the main supply
- If in any doubt consult a qualified electrician Stay safe and stay alive
You May Be Interested In...
Single Switched Socket 13 amp BS1363 with brass terminals. Fits any single (1 gang) back box
Plate Switch 1 Gang 2 Way 10amp enables the light to be controlled from 2 locations e.g. Controlling the landing light from both up and down stairs
Plate Switch 2 Gang 2 Way 10amp this format of light switch has two discreet switches on a single face plate. Basically this is two x 1 gang 2 way switches on a single face plate.
Optimum Immersion heater timer switch
