TIMco Classic Multi-Purpose - Zinc Plated - Countersunk - Cross Recess Screws - CE Approved

Timco Classic Multi-Purpose screws have been specifically designed as a multi-purpose product. The 25° sharp point, special thread design, lubrication and corrosion resistant plating ensures the screw will consistantly perform in hardwood, softwood, chipboard, MDF, PVCu and thin sheet metal. The Classic Multi-purpose screw is designed to give the user a consistant reliable product that can be used in a variety of domestic and commercial application

Certification: CE approved to BS EN 14592:2008 - CE mark in compliance with the Construction Products Regulations (Eurocode 5 EN1995-1-1) 

• Screwdriver Size:  M3.0 = Pozi No 1
•                                  M3.5, M4.0 & M5.0 = Pozi No 2
•                                  M6.0 - Pozi No 3 
• Finish: Zinc & clear passivated to give high corrosion resistance - Patented lubrication to enhance screw insertion time
• Head: Double countersunk to assist in countersinking and to reduce the possibility of shear
• Thread Length: Fully threaded to 70mm thereafter partially threaded
• Thread: 40° deep single thread gives an exceptionally high pull out resistance
• Material: C10-22 steel, surface hardened up to 750HV, core hardened to 450HV
• Suitable for: Thin sheet metal / PVCu / MDF / Chipboard / Softwood / Hardwood.
• Quantity: 200 pcs (100mm screws in box 100pcs)
• Quantity discount available
• Select sizes and quantities required from the menu below