Fence Post Base Shoe - Bolt Secure
Secure your fence to its foundation with Fence Post Base Shoes - Bolt Secure. Browse the range in Fencing Products or view the extensive product range at the DIY4U Hardware Store. Red oxide or Galvanised Finish with Fixings optional. Take advantage of volume discounts and Free delivery on orders over £50
Timco fence post supports galvanised powder coated - 100mm bolt secure with 4 x M8 x 100 Multi-fix hex head concrete bolt fixing kit
Timco fence post supports red oxide powder coated - 100mm bolt secure with 4 x M8 x 100 Multi-fix hex head concrete bolt fixing kit
Timco fence post supports 75mm hot dipped galvanised - bolt secure with 4 x M8 x 100 Multi-fix hex head concrete bolt fixing kit
Timco fence post supports shoe galvanised - 100mm bolt secure
Timco post bases bolt secure red oxide powder coated - 100mm suitable for 100m posts
Timco fence post supports 75mm hot dipped galvanised - bolt secure
Timco fence post supports red oxide powder coated - bolt secure with 4 x M8 x 100 Multi-fix hex head concrete bolt fixing kit
Timco fence post supports red oxide powder coated - bolt secure 75mm
About our post base shoes
Fence post support bolt down base
Available with either Red oxide or Hot dipped galvanised finish and in sizes to accommodate 75mm and 100mm square section posts. With the bolt secure version the post is securely fastened by 2 bolts which clamp the post to the base.
Bolt down fence post shoes are a quick and easy way to erect fencing and garden posts as they require no digging or concreting into place, saving time and money. Designed to be fixed down onto an existing concrete base or wall and are perfect for patio fencing, decking, pergolas or car ports.
Bolt Secure post bases The two M8 x 35 bolts secure and clamp the post firmly in place.
These bolts allow for post removal at a later stage.
Prevents against post rot and decay as it holds the base of the post above ground level.
Installation guidance
Select the location either existing concrete or wall and mark the spacing of the posts. Tarmac is not suitable.
Drill the 4 8mm holes at least 120mm deep and drop in one of our free offers Hexhead multi-fix concrete bolts in each hole and tighten to secure. A tip is to set a washer in the centre underneath the base. This will allow for small movement when checking that the base is plumb (sides vertical) by adjusting the tightness of each bolt. With Bolt Secure bases drop in the post and after checking it is plumb, tighten the two M8 x 35 bolts with a 13mm spanner
Take advantage of our special bundle offer of 4 Multi-fix Hex-head Concrete bolts M8 x 100mm with every post base shoe
